Fluorescent Aerosol Spray Paints   

 
All colours are lead-Free
The fluorescent pigments yield hues of extraordinary brightness, producing a sensational appearance.   Excellent for construction and surveyor markings, fluorescents may be applied over metal, wood and fibreglass.
 
Touch Dry Time:   3-10 [Minutes]
Tack Free Dry Time:   15-30 [Minutes]
Hard Dry Time:   15-15 [Hours]
Full Cure Dry Time:   48-48 [Hours]
Tech:   This systems vehicle is comprised of a soft, flexible acrylic polymer.
 
Special Instructions:   "Apply only to a clean, dry surface free from grease, wax, rust, etc.   On previously painted surfaces, test spray in a small inconspicuous area.   Hold can 8"" to 12"" from surface.   Spray in short, overlapping strokes to obtain even coverage.   Do not use a continuous spray.   It is better to apply two light coats than one heavy coat.   Spray second coat within ½ hour or wait 48 hours for the paint to fully cure.   If you miss the ½ hour “window”, the second coat may cause the paint to react and leave the paint with an “orange peel” effect."
 

---

    PN#          Description

    F100         Flamingo Pink

    F101         Jamaica Orange

    F102         Satellite Yellow

    F103         Sunset Orange

    F104         Turf Green

    F105         Titan Red

    F108         Turbo Blue

    Hi-Viz         Hi-Viz Pink

 

Prev:  Return to Paints             Next:  Reflective Paints

 
NOTE:   The colour samples seen on a website may vary from PC to PC, with different monitors and video cards.

---

 
  If what you require isn't mentioned just call, fax or use the On-line Form.